Monthly Archives: October 2021

HALO INFO

What is an LED Halo ?
An LED Halo is a custom made circuit board with LEDs consecutively soldered onto it. They are made of a rigid material which cannot be bent or flexed so that when the LEDs are illuminated, they glow in a way that produces a specific shape. LED Halo’s come in a variety of sizes and shapes and are without a doubt one of the most eye catching modifications you can make to your vehicle. Flashtech Halo rings can be seen clearly even in direct sunlight.

What is a “halo kit” ?
A “halo kit” is a combination of halo sizes made for a specific vehicle’s headlights or fog lights. A halo kit can consist of any number of halos needed to fit your vehicle’s specific needs. Normally, halo kits come in either a (2) or (4) piece kit. A halo kit is NOT a complete headlight assembly. The website pricing is just for the actual LED parts intended to be installed

FLASHTECH HID CONVERSION KIT INSTALLATION INSTRUCTIONS

1. 

Remove the existing halogen bulbs from the vehicle (refer to your vehicle's owner's manual for instructions). Some vehicles require more work than others due to their unique bulb housings and may necessitate the headlight housing and bumper to be removed entirely during installation.

2.

Install and secure the HID Xenon Bulbs in their place. The bulb should sit where the original bulb was located and the bulb connector should be connected to the bulb. The relay should be connected to the original bulb plug. Seal the headlight housing with the dust cap. 

3. 

Mount the ballasts unto a solid and well-ventilated location under the hood near the headlight reflector. Allow the necessary distance for the base connector to reach the bulb.

Flashtech Black Series LED Light Bar 

Flashtech Black series light bars have been designed for use in even the harshest outdoor environments.  Flashtech light bars utilize 3w Cree LED's in a combo spot/flood beam pattern which combines the best aspects of an intense spot beam,  while still providing exceptional wide range coverage.  Individual 10 watt LED's are used for single row bars while dual row bars use individual 3W LED's. Both dual row and single row configurations utilize the same exterior casing to ensure all accessories are compatible with the entire product line.

A completely new design, featuring an all black housing, now includes a solid black slide-on lens cover which provides exceptional lens protection while not in use.  Flashtech lens covers also provide a unique solution for laws mandating  off-road lighting be covered at all times while traveling on public roads.  Flashtech proprietary slotted light bar casing not